When "WIDTH OF RIP" is6 in, and WIDER use your
RIGHT Hand to feed the workpiece
until it is clear of
the table,
Use LEFT hand ONLY to guide the workpiece.,,
do
not FEED the workpiece
with the left hand.
When "Wl DTH OF RIP" is 2 in. to 6 in, wide USE THE
PUSH STICK to feed the work.
When WIDTH OF RIP is NARROWER
than 2 in., the
push stick CANNOT be used because the guard wil!
interfere,
. . USE the AUX LIARY FENCE/WORK
SUPPORT and PUSH BLOCK,
Attach Auxiliary
Fence/Work
Support
to rip fence
with two "C" clam ps.
33