Table of Contents
Advertisement
AUXILIARY
FENCE/WORK
SUPPORT
Make one using a piece of 3t8 in. and 3/4
in. Plywood.
Fasten together
with glue and wood screws.
NOTE: Since the Push Block
is used with the
Auxiliary
Fence, the 4-3/4
in. dimensions
must be held
identical
on both the pieces.
THIS
FACE
AND
EDGE
MUST
BE
PARALLEL
3/8 PLYWOOD
NOTE
All dimension
in
qches_"'_
5"1/2
AUXILIARY
FENCE!WORK
SUPPORT
1-1/4
AUXILIARY
PANEL WORK SUPPORT
Make
using a piece
of 3/4" and 3/8" plywood.
Fasten
together
with glue and wood screws.
Use this
auxiliary
panel work support only when cutting large
panels
that
require the rip fence to be positioned
past the
exposed
side of the extension,
3/4 PLYWOOD
3-5/8
FACE & EDGE
MUST
BE
"_
.I
PARALLEL
_"
/
2""
3/8 PLYWOOD
NOTE:
All dimension
in inches
AUXILIARY PANEL/WORK
SUPPORT
SAFETY INSTRUCTIONS
FOR
BEFORE EACH USE:
1. Inspect your saw.
a. To avoid injury from accidental starting,
unplug
the saw, turP, the switch
off and remove
the
switch key before raising or removing
the
guard, changing the cutting tool,
changing
the setup or adjusting anything.
b. Check for alignment of moving parts,
binding
of moving parts, breakage of parts mounting,
and any other conditions that may affect
the
way it works. If any part is missing,
bent,
or
broken in any way, or any electrical parts
don't
work properly, turn the saw off and unplug
the
saw.
c. Replace
damaged,
missing, or failed
parts
before using the saw again.
d. Use the sawblade guard, spreader,
and
anti-
piece). Make sure the pawls work
properly.
BASIC SAW OPERATIONS
Make sure the spreader
is in line with the
sawblade,
REMOVE
ADJUSTING
KEYS
AND
WRENCHES. Form habit of checking
for and
removing
keys and adjusting
wrenches
from
tool before turning _ton.
To avoid
injury
from jams, slips or thrown
pieces (kickback and throwback):
1. USE ONLY RECOMMENDED
ACCESSO-
RIES (See page 42) - Follow the instructions
that comewiththeaccessories.
Usingother
accessories may be dangerous.
2. Choose the right blade or cutting accessory
for the matedal and the type of cutting you
plan to de.
3, Never use grinding wheels, abrasive cut-off
wire wheels or buffing wheel. They can fly
apart explosively.
Hide quick links:
Advertisement
Table of Contents
