Cf_Rear Command; Cf_Rcode Command; Cf_Lang Command - Sanyo PLC-XL50A - 2000 Lumens Manual

PLC-XL50 Expand Serial Command Functional Specifications

8.10.5 CF_REAR Command

Command "CF_REAR_%1"[CR]
"ON" --------------------------- Select Rear
%1
"OFF" ------------------------- Cancel Rear
Set/Cancel Rear (Available only in the normal Power ON status)
When Rear is ON, image is left/right reversed.
Details
The status set by this command is stored in EEPROM and its setting is effective
after ALL is OFF
Acceptable
Response
Unacceptable

8.10.6 CF_RCODE Command

Command "CF_RCODE_%1"[CR]
"001" --------------------------- Select Code1
%1
"002" --------------------------- Select Code2
Select Code of Remote Control (Available only in the normal Power ON status)
Details The status set by this command is stored in EEPROM and its setting is effective
after ALL is OFF
Acceptable
Response
Unacceptable

8.10.7 CF_LANG Command

Command "CF_LANG_%1"[CR]
"ENG" --------------------------- Select ENGLISH
"DEU" --------------------------- Select German
"FRA" --------------------------- Select French
"ITA" ----------------------------- Select Italian
"ESP" ---------------------------- Select Spanish
"POR" --------------------------- Select Portuguese
"NED" --------------------------- Select Dutch
"SVE" --------------------------- Select Swedish
%1
"RUS" --------------------------- Select Russian
"CHI" ---------------------------- Select Chinese
"KOR" --------------------------- Select Korean
"JPN" --------------------------- Select Japanese
"FIN" ---------------------------- Select
"POL" --------------------------- Select Polish
"HUN" -------------------------- Select
"ROM" -------------------------- Select
Set language for OSD (Available only in the normal Power ON status)
Details The language set by this command is stored in EEPROM and its setting is
effective after ALL is OFF.
Acceptable
Response
Unacceptable
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
Finnish
Hungarian
Romanian
"000"[CR]
"Error Code"[CR]
28/51