Maintenance; Lubrication; Recommended Accessories - Craftsman 113.213151 Owner's Manual

maintenance
WARNING: For your 0wn safety, turn switch 1
'OFF" and remove plug from pov_er source out'_
let before maintaining or lubiricating your drill I
Frequently blow out any dust that may accumulate in,
side the motor.
A coat of furniture-type paste wax applied to the table
and column will help to keep the surfaces clean.
I WARNING: To avoid shock or fire hazard, if the I
power cord is worn or cut, or damaged in any I
way, have it replaced immediately. I
¢:::
lubrication
All of the BALL BEARINGS are packed with grease at
the factory. They require no further lubrication.
Periodically lubricate the gear and rack, table elevation
mechanism, the SPLINES (grooves) in the spindle, and
the RACK (teeth of the quill). See "Getting to Know
Your Drill Press."
r--
o
.o
WIRING DIAGRAM
.-.
o
Sears Recommends the Following Accessories o
Mortising Chisel and Bits ............ See Catalog
Clamping Kit ...................... See Catalog
15 Piece Drum Sanding Kit .......... See Catalog
Sanding Drums ................ 9-2497 -- 9-2498
Buffing Wheels up to 4" dia. max ...... See Catalog
Power Tool Know-How Handbook ........ 9-29117
Drill Bits ......................... See Catalog
Hold-Down and Guide .................. 9-2457
Drill Press Vises ................... See Catalog
Drill Press Mortising Kit ............. See Catalog
Hole Saw up to 2 1/2" dia. max ....... See Catalog
5 pc. Stop Collar Set ............... See Catalog
Sears may recommend other accessories not listed in the manual.
See your nearest Sears store for other accessories.
Do not use any accessory unless you have received and read complete instructions for its use.
i ¸
_i!-i ¸ ¸ .