Removing Chuck And Arbor - Craftsman 113.213151 Owner's Manual

3. Turn the depth scale clockwise until it stops.
4. Tighten the depth scale lock.
5. The chuck will now be held at this depth when the
feed handles are released.
DEPTH SCALE
LOCK
:ALE
REMOVING CHUCK AND ARBOR
1. With switch off -- adjust depth scale to hold drill
at a depth of (3) three inches. (See instructions for
"Locking chuck at desired depth").
2. Align key holes in spindle and quill by rotating the
chuck by hand, (See illustration)
3, Insert key wedge into key holes.
4, Tap key wedge lightly until the chuck and arbor
fall out of spindle.
NOTE: Place one hand below chuck to catch it when
it falls out,
SPINDLE KEY
HOLE
QUILL KEY
HOLE
ARBOR
LOCKING
COLLAR
CHUCK
SLEEVE
WEDGE KEY
CHUCK
CHUCK
BODY
21