Epson SR-600 Developer's Manual page 169

Confidential
Suspend
Set the BIOS in the suspend mode as listed below:
❏ CPU
❏ Video
❏ CPU fan, main power fan
❏ HDD
Suspend Sequence
The BIOS Suspend
Timer is timed out
(except Windows 98)
*1
APM BIOS is used. *2
No DOS
( Windows NY) *3
Suspend process by
BIOS.(CPU, FAN,
Video Off, 2.5" x 2) *4
*1:When the Video Off is set, Suspend transition time is Video Off Timer Setting Time added Suspend Timer Setting
Time.
*2: When the OS is booted, it connects to APM BIOS and BIOS recognize APM BIOS.
*3: If the APM BIOS is set at disabled from the BIOS Setup, it is processed by the BIOS under Windows 95/98 system.
*4: BIOS sets the mode at suspend in the last process, and it determines whether or not it is on the suspend mode.
Rev.A
:Stop (Terminated by STPCLK kept supplying the clock.)
:Off
:On
: Power Down
Send Suspend request to
the Operation System from
the BIOS.
Suspend process by the
operation system. (e.g each
devices' Suspend
operation)
Send Suspend request to
the BIOS from the
Operation System.
A2-1 Suspend transition sequence
Developer's Guide SR-600
The OS Suspend Timer is
timed out (WIndows 98
only) or select Suspend
from Start Menu
(Windows 95/98 only)
Power Management Appendix 2-3