Setup Menu - Epson SR-600 Developer's Manual

Confidential
Messages
The message portion of the screen displays the result of tests.
Table 3-14 Message area
Test category
TM printer
DM display
Drawer kick-out
Loop-back
LPT1 print

Setup Menu

Following three commands can be executed from the Setup menu.
❏ Drawer Password
It sets the password to access to the drawer kick out test .
❏ Drawer ON time
It sets the length of time for the voltage signal supplied to the cash drawer solenoid to open
it.
❏ M/B Information
Displays the various informations on the motherboard.
Rev.A
Message Description
Disabled This port is disabled.
Done The TM printer test is completed. Check the printing motion and autocutter
motion.
Disabled This port is disabled.
Done DM display test is completed. Check display.
Disabled This port is disabled.
Done The drawer kick-out test is completed. Check the motion of cash drawer.
Error The diagnostics test failed. This message also appears when a loop-back
connector is not connected or the wrong loop-back connector is connected.
Disabled This port is disabled.
OK The test completed successfully.
Time out The printer connected to the LPT1 port did not enter a ready state after 2
seconds.
This port is disabled.
Disabled
Ok The print data was sent successfully.
Developer's Guide SR-600
BIOS Setup 3-21