Table of Contents
Advertisement
Confidential
Setting a Password for the Drawer Kick Out Test
Follow the procedures below to set a password for the drawer kick out test.
1. Select "Drawer Password" from the pull down menu. You are asked to enter the
password.
2. Enter the password to be set and press Enter. The password should be 4 to 8
alphanumeric characters. Upper and lower case characters are distinguished. The
Password must be at least 4 characters.
3. Message "Re-enter" appears. Input the password again and press Enter. The password is
now set.
When the password is set, inputting the password is required when you try to execute the
Drawer kick out test.
3-22 BIOS Setup
3-2 Enter Password screen
Rev.A
Advertisement
Table of Contents
