Table of Contents
Advertisement
Confidential
Front Power Switch Function
Power Off
In this mode, it forcibly turns down the power by the BIOS. However, it resumes while it is
suspended.
Power Off Mode of Front Power Switch Process Sequence
A2-5 Power Off Mode of Front Power Switch Process Sequence
If APM BIOS is in use for the BIOS, Suspend event is sent to OS from BIOS and the BIOS forcibly
turns off the power. Therefore, it operates as if it is in Power Off status when it tutns into the
Suspend mode in Windows 95/98.
If the main power switch is pressed during the Suspend mode, it turns to resume event and
follows "Resume from the Suspend Sequence"(appendix 2-5).
Also, it does not recognize wheather or not the Video is off, therefore it forcibly changes its
status to power off.
If the system hungs in this mode and cannot turn off the power, kept pressing the switch for
more than 4 seconds and the hardware(Chipset) turns off the power.
Appendix 2-8 Power Management
Front Power Switch is
pressed
Yes
Suspend Mode?
No
Yes
APM BIOS is used.
No
Windows NT, DOS
Current BIOS Specification
Power Off process
by BIOS
Processing as a Resume
Event from Suspend
Send Suspend request
from the BIOS to the
Operation System.
Suspend process by the
Operation System
Send Suspend request to
the BIOS from the Operation
System.
Suspend porcess by
.
BIOS
Rev.A
Advertisement
Table of Contents
