Advertisement
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGH HOLE TYPE (WITH NO EJECTOR, STANDARD TYPE)
SUPPORTS TYPE I, II CARDS
DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Part number: FCN-565P068-G/C-V4
3 (0.118)
7 (0.276)
No.1
No.35
• Models with a board lock (metal fitting for direct mounting) are also available. Part number: FCN-565P068-G/12-V4 (for 1.2 mm (0.047 in.) to 1.6 mm (0.063 in.) thick PC board)
• Long-terminal models are also available.
• Models which support Type III are also available.
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE WITH NO EJECTOR, LOW-PROFILE TYPE
SUPPORTS TYPE I, II CARDS
DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Part number: FCN-565P068-G/01-V4
3
4
(0.118)
(0.157)
3.6 (0.141)
Use M2.5 (0.098 in) nut and screws. Screw torque is 3.2 kg/cm.
In order to avoid damage to the connector, do not pull out the card at an angle.
Specifications
subject to change
50.8 (2)
2.5mm (0.098)
41.91 (1.65)
deep spot facing
1.27 (0.05)
59.7(2.35)
41.91 (1.65)
1.27 (0.05)
No.17
No.34
No.51
No.68
Part number: FCN-565P068-G/13-V4 (4 mm (0.157 in.))
Part number: FCN-565P068-G/17-V4
50.8 (2)
1.27 (0.05)
(34-1) = 41.91 (1.65)
2.5mm (0.098)
deep spot facing
1.27 (0.05)
58.7 (2.31)
1.27 (0.05)
(34-1) = 41.91 (1.65)
1.27 (0.05)
No.1
No.34
No.35
No.68
Dimensions are in millimeters (inches)
No.1
No.2
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
Unit: mm (in.)
FCN-565P068-G/08-V4 (for 1.0 mm (0.039 in.) thick PC board)
FCN-565P068-G/02-V4 (10 mm (0.394 in.))
FCN-565P068-G/18-V4 (with board lock, for 1.2 mm (0.047 in.) to 1.6 mm
(0.063 in.) thick PC board )
No.1
No.2
1.905 (0.075)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
5.715 (0.225)
www.fcai.fujitsu.com
±0.1 (0.0039)
50.8 (2)
41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
No.3
±0.05 (0.0020)
No.68
±0.05 (0.0020)
68- ø 1 (0.039)
±0.05 (0.0020)
2- ø 2.8 (0.110)
(Card insertion side)
±0.1 (0.0039)
50.8 (2)
41.91(1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
No.3
±0.05 (0.0020)
No.68
(Card insertion side)
Unit: mm (in.)
3
Advertisement
