Advertisement
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, 4.5 MM
(0.177 IN.) RAISED TYPE) SUPPORTS TYPE I, II CARDS
DIMENSIONS
Part number: FCN-565P068-G/J25-V4 (supports type I, II card)
Part number: FCN-565P068-G/J25-4V (supports type I, II, III card)
3(0.118)
4.5 (0.177)
4.8 (0.189)
8 (0.315)
PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
±0.1 (0.0039)
50.8 (2)
No.1
1.27 (0.05)
(68/2-1)
= 41.91 (1.65)
±0.1 (0.0039)
±0.05 (0.0020)
1.27 (0.05)
No.35
68- ø 1 (0.0394)
4 - ø 2.8 (0.110)
±0.1 (0.0039)
+0
51.7 (2.035)
61.7 (2.429)
–0
+0
41.7 (1.642)
50.8 (2)
±0.1 (0.0039)
–0
61.7 (2.429)
Component mounting is prohibited in the hatched areas.
Specifications
subject to change
59.7 (2.35)
50.8 (2)
59 (2.323)
42 (1.654)
35.5 (1.398)
No.1
No.34
No.35
No.68
50.8 (2)
No.34
No.68
±0.05 (0.0020)
Unit: mm (in.)
Dimensions are in millimeters (inches)
10 (0.394)
8 (0.315)
MOUNTING EXAMPLE
• Components with a height of 4.3 mm (0.169 in.) maximum can
be installed under the connector.
• Use M2.5 mm (0.098 in.) x 5 mm (0.197in.) self-tapping screws
(when a 1.6 mm (0.063 in.) thick PC board is used) to mount
the connector to the board.
www.fcai.fujitsu.com
Unit: mm (in.)
11
Advertisement
