PRIMEQUEST 1000 Series Hardware Installation Manual
APPENDIX A Racks
Procedure for removing cable holders (Model 1740)
Remove the cable holders by using a Phillips screwdriver.
No.
(1)
M5 screw
(2)
Cable holder
(3)
Phillips screwdriver
FIGURE A.4 Removing a cable holder (Model 1740)
Procedure for removing cable holders (Model 1640/Model 1624)
Remove the cable holders by using a Phillips screwdriver.
Before removing cable holders on the side of the door hinges, you need to remove the attached door.
Description
56
C122-H004-07EN