Cooling And Exhaust Air Flows In The Devices; Cooling And Exhaust Air Flows In The Primequest 1800E2/1800E; Figure 1.12 Cooling And Exhaust Air Flows In The Primequest 1800E2/1800E - Fujitsu PRIMEQUEST 1000 Series Hardware Installation Manual

PRIMEQUEST 1000 Series Hardware Installation Manual
CHAPTER 1 Installation Information
1.5

Cooling and Exhaust Air Flows in the Devices

This section shows the cooling and exhaust air flows in each device.
-

1.5.1 Cooling and exhaust air flows in the PRIMEQUEST 1800E2/1800E

- 1.5.2 Cooling and exhaust air flows in the PCI_Box
Note
An important consideration in the planning for installation of the device is the cooling and exhaust air flows. If the
device is installed without regard to these air flows, the device may take in exhaust air from another device, or vice
versa. The exhaust air would likely have an effect on that device. Such an installation runs the risk of continuous
output of intake air temperature alarms from this device or another device that monitors the intake air temperature.
1.5.1 Cooling and exhaust air flows in the PRIMEQUEST 1800E2/1800E
No.
(1) Air intake
(2) Exhaust air
(3) Exhaust vent

FIGURE 1.12 Cooling and exhaust air flows in the PRIMEQUEST 1800E2/1800E

Description
14 C122-H004-07EN