Fujitsu PRIMEQUEST 1000 Series Hardware Installation Manual page 44

PRIMEQUEST 1000 Series Hardware Installation Manual
CHAPTER 2 Connection Information
- The numbers in parentheses ( ) correspond to the cable numbers in
and peripheral devices) (PRIMEQUEST 1800E2)
- For a 10GBase-CR cable, use the 10GBase-CR (TWINAX) cable specified for the connected switch product.
List of cables
Determine the length of an external interface cable by considering the extra length required for laying the cable
inside the cabinet.
TABLE 2.3 Cables (for the basic interfaces and peripheral devices) (PRIMEQUEST 1800E2)
No. Name
(1) Twisted-pair cable
(Category 5
UTP cable)
(2) Enhanced Category 5
UTP cable
(3) SAS cable
(4) RS232C cable
(D-Sub 9Pin-9Pin,
crossover cable)
(5) PCI Express cable
(6) Multimode
Fibre Channel cable
.
Model name Commercially available types
TPCBL-B005 Sold separately: Select from lengths of 5, 10,
15, 30, 50, and 100 m.
TPCBL-B010
100Base-TX and 10Base-T connections use
TPCBL-B015
this cable (Category 5).
TPCBL-B030 RJ45 8Pin - RJ45 8Pin
TPCBL-B050
TPCBL-B100
TPCBL-C005 Sold separately: Select from lengths of 5, 10,
15, 30, 50, and 100 m.
TPCBL-C010
1000Base-T, 100Base-TX, and 10Base-
TPCBL-C015
T connections use this cable (Category 5e).
TPCBL-C030 RJ45 8Pin - RJ45 8Pin
TPCBL-C050
TPCBL-C100
CBL-SASM1U Sold separately: Select from lengths of 1.5
and 3 m.
miniSAS (SFF-8088) - miniSAS (SFF-8088)
CBL-SASM3U
For use in countries other than Japan
FMV-CBL501
Included with
PCI_Box
CBL-MLLB02 Sold separately: Select from lengths of 2, 5,
and 15 m.
CBL-MLLB05
Dual LC connector - Dual LC connector
CBL-MLLB15
Without cable insulation
CBL-MLLC05 Sold separately: Select from lengths of 5, 10,
20, 30, 40, and 50 m.
CBL-MLLC10
Dual LC connector - Dual LC connector
CBL-MLLC20
With cable insulation
CBL-MLLC30
24
TABLE 2.3 Cables (for the basic interfaces
5 m
10 m
15 m
30 m
50 m
100 m
5 m
10 m
15 m
30 m
50 m
100 m
1.5 m
3 m
1.5 m
2 m
2 m
5 m
15 m
5 m
10 m
20 m
30 m
C122-H004-07EN
Length