Specifications - Craftsman 315.101390 Owner's Manual

INTRODUCTION
CONGRATULATIONS AND THANK YOU FOR BUYING
THIS CRAFTSMAN 1/2 INCH HAMMER DRILL. It has
been designed, engineered and manufactured to provide
you with Sears high standard of dependability, ease of
operation, and operator safety. Properly cared for, itwill give
you years of rugged, trouble-free performance.
CAUTION:
Carefully read through this entire owner's manual before
using your new hammer drill. Pay close attention to the
Rules For Safe Operation, Warnings and Cautions. If you
use your drill properly and only for what it is intended,
you will enjoy years of safe, reliable service.
SPECIFICATIONS:
Chuck
Chuck Capacity
Horsepower
Rating
No Load Speed
Hammer Speed
Hammer Travel
Switch
1/2 In. Chuck With Chuck Key
5/64 In. To 1/2 In.
3/8
120 Volts, 60 Hz, AC only, 3.5 AMPS
0 - 1200 RPM
0 - 19,200 BPM
.025
Adjustable Variable Speed/Reversible
Your hammer drill has many features for making your drilling
operations more pleasant and enjoyable. Safety,
performance, and dependability have been given top priority
in the design of this drill making it easy to maintain and
operate.
FULL ONE YEAR WARRANTY ON CRAFTSMAN HAMMER DRILL
J
If this Craftsman Hammer Drill faits to give complete satisfaction within one year from the date of purchase, RETURN
IT TO THE NEAREST SEARS STORE IN THE UNITED STATES, and Sears will repair it, free of charge.
if this Craftsman Hammer Drill is used for commercial or rental purposes, this warranty applies for only 90 days from
the date of purchase.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., DEPT. 817 WA, Hoffman Estates, IL 60179
TABLE OF CONTENTS
1. Rules for Safe Operation ............................................................................ 2-3
2. Introduction and Product Specifications ......................................................... 4
3. Warranty and Table of Contents ..................................................................... 4
4 Operation ................................................................................................... 5-11
5. Maintenance and Accessories ..................................................................... 12
6. Exploded View and Parts List ................................................................. 14-15
7. Parts Ordering / Service ............................................................................... 16
Look for this symbol to point out important safety precautions.
It means attention!!! Your safety is involved,
WARNING:
The operation of any hammer drill can result in foreign objects being thrown into your eyes,
which can result in severe eye damage. Before beginning power tool operation, always wear
safety goggles or safety glasses with side shields and a full face shield when needed. We
recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with
side shields, available at Sears Retail Stores.
Page 4