Responding To Messages - Kyocera ECOSYS FS-C8520MFP Operation Manual

Troubleshooting > Responding to Messages

Responding to Messages

If the touch panel or the computer displays any of these messages, follow the corresponding procedure.
A
Message
Acceptable staple count
exceeded.*
Activation error.
Add the following paper in
cassette #.
Add the following paper in the
multi purpose tray.
Adjusting Scanner.
Adjusting...
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
B
Message
Box limit exceeded.*
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
Checkpoints
Is the acceptable staple count
exceeded? For details, refer to
Document Finisher (option) on
page 11-22.
—
Is the indicated cassette out of
paper?
Is the paper of the selected size
loaded in the multi purpose tray?
Does the paper size set for the
paper source matches the paper
size that was actually loaded?
—
—
Checkpoints
Is [End] displayed on the touch
panel?
10-14
Corrective Actions
Press [Continue] to print without
stapling.
Press [Cancel] to cancel the job.
Turn the main power switch off and on. If
the error exists, contact administrator.
Load paper.
Press [Paper Selection] to select the
other paper source.
Press [Continue] to print on the paper in
the currently selected paper source.
Load paper.
Press [Paper Selection] to select the
other paper source.
Press [Continue] to print on the paper in
the currently selected paper source.
Press [Continue] to continue printing.
Press [Cancel] to cancel the job.
The machine is under the adjustment to
maintain its quality. Please wait.
The machine is under the adjustment to
maintain its quality. Please wait.
Corrective Actions
Document box is full, and no further
storage is available; Job is canceled.
Press [End]. Try to perform the job again
after printing or deleting data from the
Document Box.
Reference
Page
—
2-12
3-3
3-5
—
—
—
Reference
Page
—