Kyocera ECOSYS FS-C8520MFP Operation Manual page 341

Troubleshooting > Responding to Messages
Message
Removable Memory is full.*
Remove originals in the
document processor.
Replace all originals and press
[Continue].
Replace MK.
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
S
Message
Scanner memory is full.*
Send error.*
Set cassette.
Checkpoints
—
Are there any originals left in the
document processor?
—
—
Checkpoints
—
—
Have the paper width guide and
paper length guide been loaded
properly?
10-21
Corrective Actions
Job is canceled. Press [End].
Insufficient free space in the removable
memory. Delete unnecessary files.
Remove originals from the document
processor.
Remove originals from the document
processor, put them back in their original
order, and place them again. Press
[Continue] to resume printing.
Press [Cancel] to cancel the job.
Replacement of the parts in the
maintenance kit is necessary at every
200,000 pages of printing and requires
professional servicing. Contact your
Service Representative.
Corrective Actions
Scanning cannot be performed due to
insufficient memory of scanner. Only
one copy of the scanned pages is
available. Press [Continue] to print,
send or store the scanned pages. Press
[Cancel] to cancel the printing job.
The machine may reproduce the same
originals by arranging the following
settings:
-Reduce the number of originals to be
scannned at once.
Furthermore, the machine may
reproduce the same originals by
arranging the following settings:
- Select [Copy Priority] of Main Memory
in System Menu.
NOTE: Before changing the Main
Memory setting, contact your
administrator.
An error has occurred during
transmission. The job is canceled. Press
[End].
Refer to Responding to Send Error for
the error code and corrective actions.
Load the paper width guide and paper
length guide properly so that there is no
space between the guides and the
paper.
Reference
Page
—
—
—
—
Reference
Page
9-24
10-23
3-3