Kyocera ECOSYS FS-C8520MFP Operation Manual page 342

Troubleshooting > Responding to Messages
Message
Staple is empty.*
Staple jam.
System error.
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
T
Message
The cover is open.
The manufacturer assumes no
responsibility for damage caused
by a non-genuine toner.
The phone receiver is off the
hook.
The print system connected to
the current port is not supported
by the printer driver. Use a
printer driver for this port that
matches the print system.
The slit glass requires cleaning.
This memory is not formatted.
Toner is empty. [C][M][Y][K]
Toner is running out. [C][M][Y][K]
Checkpoints
Has any of the document finisher
run out of staples?
—
—
Checkpoints
Is there any cover which is
open?
Is the installed toner container
our own brand?
—
Is the printer driver for this
product used?
—
Is the removable memory
formatted by this machine?
—
—
10-22
Corrective Actions
If the staples are depleted, the machine
will stop and the location of staple
depletion will be indicated on the touch
panel.
Leave the machine on and follow the
instruction to replace the staple case.
Press [Continue] to print without
stapling.
Press [Cancel] to cancel the job.
If a staple jam occurs, the machine will
stop and the location of the jam will be
indicated on the touch panel.
Leave the machine on and follow the
instruction to remove the jammed
staple.
System error has occurred. Follow the
instructions on the touch panel.
Corrective Actions
Close the cover indicated on the touch
panel.
We will not be liable for any damage
caused by the use of third party supplies
in this machine. If you want to continue,
press [Next].
Put down the receiver.
Check the product name of the machine
and reinstall the printer driver.
Clean the slit glass using the cleaning
cloth supplied with the document
processor.
Perform [Format] on this machine.
Replace the toner container.
NOTE: If the color toner is empty
but the black toner is remained, the
machine continues printing in black
and white by selecting [Print in
Black and White] of Color Toner
Empty Action.
It is almost time to replace the toner
container. Obtain a new toner container.
Reference
Page
10-5
10-30
—
Reference
Page
—
—
—
2-14
10-6
8-11
10-2
—