Kyocera ECOSYS FS-C8520MFP Operation Manual page 335

Troubleshooting > Responding to Messages
C
Message
Calibrating...
Cannot connect to Authentication
Server.*
Cannot duplex print on the
following paper.*
Cannot offset the following
paper.*
Cannot print the specified
number of copies.*
Cannot process this job.*
Checkpoints
—
—
—
—
—
Did you select a paper size/
media type that cannot be duplex
printed?
Did you select a paper size/
media type that cannot be offset?
–
Do you want to print the data
stored in the USB memory?
—
10-15
Corrective Actions
The machine is under the adjustment to
maintain its quality. Please wait.
Set machine time to match the server's
time.
Check the domain name.
Check the host name.
Check the connection status with the
server.
Press [Paper Selection] to select the
available paper.
Press [Continue] to print without using
Duplex function.
Press [Paper Selection] to select the
available paper.
Press [Continue] to print without using
Offset function.
Only one copy is available. Press
[Continue] to continue printing. Press
[Cancel] to cancel the job.
The machine may reproduce the same
originals by arranging the following
settings:
- Uncheck [RAM Disk] in the [Device
Settings] tab of the printer's properties.
NOTE: If you unchecked the [RAM
Disk], check the [RAM Disk] again
after the printing is completed. If
not, print speed may be reduced.
Only one copy is available. Press
[Continue] to continue printing. Press
[Cancel] to cancel the job.
The machine may reproduce the same
originals by arranging the following
settings:
- Reduce the number of copies to be
printed at once.
Furthermore, the machine may
reproduce the same originals by
arranging the following settings:
- Select [Copy Priority] of Main Memory
in System Menu.
NOTE: Before changing the Main
Memory setting, contact your
administrator.
This job is canceled because it is
restricted by User Authorization or Job
Accounting. Press [End].
Reference
Page
—
9-24
9-34
9-34
—
4-8
3-44
—
9-24
—