Diagnostic Aids; Power-On Self Test Sequence - Lexmark Optra Color 1200 Service Manual

5050-001

3. Diagnostic Aids

Note: When trouble shooting, or prior to making any adustment to
print quality, always be sure of the following:
•
The printer is installed on a level rigid surface.
•
The OPCs are never exchanged. Do not exchange a black OPC
for a color OPC, as they will have different surface phase
counts.
•
Radar Page is always used when adjusting print registration.

Power-On Self Test Sequence

1. Power on.
2. Printer and RIP controller check:
•
ROM and RAM
•
Fuser thermistor
3. Printer hardware check:
•
Paper jam
•
Printer cartridge unit
•
Toner supply
•
Paper cassette present
4. Fuser temperature check. Temperature regulated.
5. Ready:
•
Printer controller
•
RIP controller
•
Printer condition
•
Motor/Fan
•
Heater
6. DC motor drive 1
7. Feeding paper
8. Print
9. Stepper motor drive 2
10. Paper exit
11. Stop
Diagnostic Aids
3-1