Printer Controller (614 Prcont) Removal - Lexmark Optra Color 1200 Service Manual

5050-001

Printer Controller (614 PRCONT) Removal

1. Remove the rear cover and the right side cover.
2. Remove the connector and the printer control board, (6 screws.)
Installation Notes:
•
Be sure to take the EEPROM (U107) from the old board and
install it on the new board.
•
If you change the EEPROM, the LED light quantity, total
counter, printing position (margins), and printhead adjustments
(X,Y, and Theta) should be readjusted in the service mode.
4-28
Service Manual