Operator Panel Buttons - Lexmark Optra Color 1200 Service Manual

5050-001

Operator Panel Buttons

Go Press the
• Exit printer menus and return the printer to the ready state
• Clear certain messages from the display
If you've changed printer settings from the operator panel
menus, press Go before you send a job to print.
Menu > Press the
and
<Menu • Enter the menus from the
• Scroll to the next (
menu item, or value
• Increase or decrease a numerical value for a menu item
setting
• Display the Job Menu or the Supplies Menu while the printer is
busy
Select Press the
• Select the menu shown on the second line of the display and
view the available menu items
• Select the menu item shown on the second line of the display
and view the available values and the current user default
setting for that menu item
• Save the value displayed on the second line of the display as
the new user default setting
• Clear certain messages from the display
Return Press the
menu structure without selecting a new menu item or value.
Stop Press the
Waiting
Not Ready
printer activity.
For example, if you need to load paper in a tray while a job is
printing, press
removing the tray from the printer. Reinsert the loaded tray, and
then press
button to:
Go
or
Menu> <Menu
Menu>
button to:
Select
Return button to back up to the previous level of the
Stop button when the printer displays the
message to temporarily stop all activity. The message
is then displayed until you press
and wait for the printer motors to idle before
Stop
.
Go
button to:
state
ready
) or the previous (
Go
Diagnostic Aids
) menu,
<Menu
Busy or
to continue
3-3