Scanning To A Memory Card - Epson Stylus Photo RX580 Basic Manual

Scanning to a Memory Card

You can scan and save documents or photos to a memory card in either JPEG or
PDF format. First, insert your memory card following the instructions on page 22.
Then follow these steps.
1. Open the document cover and place your original
face-down on the glass, as described on page 64.
2. Press the
3. Press l or r to select
then press
4. Use the u, d, l, and r buttons to select the following options:
■
Format
■
Scan Area
Otherwise, select
■
Original
■
Quality
(if you're scanning a photo or picture).
5. Press
OK
memory card.
When scanning is finished, you see a confirmation screen. Note the name
given to your image and its location on the card.
Caution:
Never open the scanner while scanning, or you may damage the RX580. Do not remove
the card or turn off the RX580 while the memory card light is flashing, or you may lose
data. If your RX580 is connected to a computer, make sure you follow the right steps to
remove the card or turn off or disconnect the RX580. (See page 23.)
Note:
If the edges of the scan are cut off, move your original away from the corner slightly.
66
Scanning a Photo or Document
mode button.
Memory Card
Scan to Memory Card
.
OK
: select (for photos) or
JPEG
: if the edges of the photo are light in color, select
Auto Crop
: select (if you're scanning a document) or
Text
: Select
Standard
. The photo is scanned and saved to the
,
(for documents).
PDF
.
(if you're scanning a document) or
Max Area
Photo
Graphics
folder on your
EPSCAN
.
.