Epson Stylus Photo RX580 Basic Manual page 37

Borderless Expansion
When you print borderless photos, your image is slightly expanded and cropped to
fill the sheet of paper. If too much of your photo edges are cut off, you can adjust
the expansion setting as described below.
1. Press the
Print Settings
x
2. Press u to choose
3. If too much of your photo edges are cut off, select
expansion). If you see a white edge on your photo, select
4. Press to save your setting.
OK
Note:
This setting remains in effect until you change it. To reset all settings to their
defaults, see page 40.
Fit Frame
If your photo is too long or wide to fit inside the available space on your selected
layout, part of the image is automatically cropped. If you want your entire image
to print with white space filling in the rest of the print area, you can turn off
Frame.
Cropped area
To turn automatic cropping off or on:
1. Press the
Print Settings
x
2. Press d or u to select
3. Select or
Off On
Note:
This setting remains in effect until you change it. To reset all settings to their
defaults, see page 40.
button.
, then press r.
Expansion
Fit Frame turned on
button.
, then press r.
Fit Frame
, then press .
OK
, or (least
Mid Min
Standard
Fit Frame turned off
Cropping Your Photos
.
Fit
37