Table of Contents
Advertisement
2. Place the index sheet face-down on the glass, in the upper
left corner, so that the top of the sheet is aligned against the
left edge of the glass.
3.
Close the document cover.
Note:
Don't remove the memory card while you're printing from an
index sheet.
4. Load up to 100 sheets of plain paper or up to 20 sheets of
photo paper at a time (see page 4 for details). You can load
more paper later as necessary to print all your selected
photos.
The display should now look
like this, indicating that the
CX7000F Series is ready to
scan the index sheet:
If this setting is not displayed, press the
button until it is displayed.
5. Select
or
Plain Paper
Photo Paper
loaded).
If you select
Plain Paper
border. If you select
Photo Paper
borderless, to the edge of the paper.
6. Select
,
, or
Letter
4"x 6"
7. Press the x
Start Color/OK
Note:
If you need to stop printing, press the y Cancel/Back button.
8. When you are done printing, wait until the memory card
access light is not flashing, then remove the memory card by
pulling it straight out of its slot.
2.Img:92 Scn Idx
Memory Card
(whichever you
, the photos print with a white
, the photos print
for the paper size.
5"x 7"
button to start printing.
Printing All Photos or DPOF Photos
Follow the steps below to print one copy of each photo on the
card or to print only those photos that were pre-selected with
your camera's DPOF (Digital Print Order Format) feature.
1. Load up to 100 sheets of plain paper or up to 20 sheets of
photo paper at a time (see page 4 for details.) You can load
more paper later as necessary to print all your photos.
2. Insert the memory card (see page 7 for details).
3. Press the
Memory Card
button repeatedly, until the
display looks something like
this:
Note:
If the memory card does not contain DPOF information, one copy
of all the photos on the card will be printed.
4. Select
Plain Paper
loaded).
If you select
Plain Paper
border. If you select
borderless, to the edge of the paper.
5. Select
,
Letter
4"× 6"
6. Press the x
Start Color/OK
Note:
If you need to stop printing, press the y Cancel/Back button.
If you see the Paper Out message, load more paper and press
x
the
Start Color/OK button.
When you are done printing, wait until the memory card
access light is not flashing, then remove the memory card by
pulling it straight out of its slot.
Printing From a Digital Camera
If your camera is PictBridge
compatible, you can print your JPEG photos by connecting
your digital camera directly to your CX7000F Series. Your
photos must be sized from 80 × 80 pixels to 9200 × 9200
pixels.
1. Make sure your CX7000F Series is not printing.
2. Remove any memory cards from slots.
3. Load the type of paper you want to use (see page 4). Load
enough sheets for the number of photos you'll be printing.
4. Press the paper type button to select
borderless photos (without a white border). Select
if you want your photos printed with a small white
Paper
border.
10/06
Epson Stylus CX7000F Series
3.Img:92 All/DPO
or
(whichever you
Photo Paper
, the photos print with a white
, the photos print
Photo Paper
, or
for the paper size.
5"× 7"
button to start printing.
™
- or USB DIRECT-PRINT
Photo Paper
™
-
to print
Plain
9
Advertisement
Table of Contents
