Epson Stylus Photo RX580 Basic Manual page 35

3. Select from these options, then press
■
PhotoEnhance
photos.
■
: Uses your camera's PRINT Image Matching or Exif Print settings
P.I.M.
(this option is automatically selected when your pictures contain P.I.M.
data).
■
: Select this if you don't want to use P.I.M., Exif, or PhotoEnhance.
None
4. Press again, then press the x
OK
Note:
This setting remains in effect until you change it. To reset all settings to the defaults, see
page 40.
To make manual adjustments in addition to the automatic ones, follow the steps in the
next section.
Manually Adjusting Your Photos
First, select the photo or photos you want to print, then follow these steps:
1. Press the
Print Settings
x
2. Press d or u to choose one of these options, then press r.
■
Color Effect
(for black and white printing)
B&W
■
Brightness
■
Contrast
■
Sharpness
■
Saturation
■
: available only for CD/DVD printing; choose
Density
, or
Darker
3. Adjust any settings as necessary, then press
Note:
These settings remain in effect and apply to all selected photos until you change
them. To reset all settings to the defaults, see page 40.
4. Press again, then press the x
OK
: Adjusts the brightness, contrast, and saturation of your
button.
: choose ,
Off Sepia
: choose
Standard
: choose
Standard
: choose
Standard
: choose
Standard
Darkest
:
OK
button to print your photo or photos.
Start
(for an old-fashioned brown effect) or
, ,
Brighter Brightest
, , or
Higher Highest
, ,
Sharper Sharpest
, ,
Higher Highest
OK.
button to print your photo or photos.
Start
Touching Up Your Photos
, , or
Darker Darkest
, , or
Softer Softest
, , or
Lower Lowest
,
Standard
35