Epson Stylus Photo RX580 Basic Manual page 42

6. After you select the settings you want, press
Note:
These settings remain in effect until you change them, so you only need to set
them the first time you print from your camera or phone. To reset all settings to
their defaults, see page 40.
7. Connect the USB cable that came with your camera or phone to the external
device USB (
other end to the port on your camera or phone.
8. Turn on your camera or phone. One of the following messages is displayed on
the RX580 screen:
9. Use your camera or phone to select the photos you want to print, adjust any
necessary settings, and print your photos. See your camera's or phone's manual
for details.
42
Printing From a Camera, PDA, or Phone
port on the front of your RX580. Then connect the
EXT. I/F)
OK.