Epson Stylus Photo RX580 Basic Manual page 30

Setting
Color Effect
Enhance
Red Eye
Brightness
Contrast
Sharpness
Saturation
Date
Print Info.
Fit Frame
Bidirectional
Expansion
30
Printing From a Memory Card
Description
Select B&W to print your photo in black and white. Select
Sepia to print your photo in a brown tone for an old-fashioned
look.
Select PhotoEnhance
contrast, and saturation of your photos.This setting is
recommended for the best quality printing.
Select P.I.M. to use your camera's PRINT Image Matching
Exif Print settings.
Select On to correct red eye. See page 34 for more information.
Adjust this setting if your prints are too light or too dark.
Adjust this setting to increase the contrast.
Adjust this setting to sharpen or soften your prints.
Adjust the density of color. A higher saturation makes the color
appear richer, while a lower saturation makes it appear paler.
Prints the date your photo was taken in one of the following
formats:
yyyy.mm.dd (2006.04.13), mmm.dd.yyyy (Apr.13.2006),
dd.mmm.yyyy (13.Apr.2006), or None (no date).
Select On to print your camera's exposure time (shutter speed),
F-stop (aperture), and ISO speed.
Select On to automatically crop your photo to fit inside the
space available for the layout you selected. Select Off to turn
off automatic cropping and leave white space around the photo.
Select On to increase the print speed. Select Off to improve the
print quality (but your photos print more slowly).
When you print borderless photos, your image is slightly
expanded and cropped to fill the sheet of paper. If too much of
your photo edges are cut off, select Mid or Min.
™
to automatically adjust the brightness,
®
or