PC-DIO-24 Hardware and Software
Configuration Form
___________________________________________________
Record the settings and revisions of your hardware and software on the line to the right of each item. Complete a
new copy of this form each time you revise your software or hardware configuration, and use this form as a
reference for your current configuration. Completing this form accurately before contacting National Instruments
for technical support helps our applications engineers answer your questions more efficiently.
National Instruments Products
•
PC-DIO-24 Revision
•
Base I/O Address of PC-DIO-24
(Factory Setting–hex 210)
•
Interrupt Enable Line of PC-DIO-24
(Factory Setting–PC4)
•
Interrupt Level of PC-DIO-24
(Factory Setting–5)
•
Handshaking Mode
(mode 0, mode 1, mode 2)
•
NI-DAQ or LabWindows/CVI Version
Other Products
•
Computer Make and Model
•
Microprocessor
•
Clock Frequency
•
Type of Video Board Installed
•
DOS Version
•
Programming Language
•
Programming Language Version
•
Other Boards in System
•
Base I/O Address of Other Boards
•
Interrupt Enable Line
of Other Boards
•
Interrupt Level of Other Boards
_________________________________________________
_________________________________________________
_________________________________________________
_________________________________________________
_________________________________________________
_________________________________________________
_________________________________________________
_________________________________________________
_________________________________________________
_________________________________________________
_________________________________________________
_________________________________________________
_________________________________________________
_________________________________________________
_________________________________________________
_________________________________________________
_________________________________________________