Installing The Software; Installing Other Software; Example Programs - National Instruments NI WLS/ENET-9163 User Manual

Installing the Software

Installing Other Software

Example Programs

Using the NI WLS/ENET-9000 Series Device
Using the NI WLS/ENET-9000 Series Device on a Desktop
Note NI ENET-9000 Series Only—the NI ENET-9000 Series device has underside
grooves that allow it to be stacked on top of other NI ENET-9000 Series devices.
Do not stack an NI WLS-9000 Series device on top of an NI WLS-9000 Series
Caution
device.
This transmitter must not be co-located or operated in conjunction with any other
Caution
antenna or transmitter.
NI WLS/ENET-9163 Carrier User Guide and Specifications
NI WLS/ENET-9000 Series device software support for Windows
Vista/XP/2000 is provided by NI-DAQmx.
The DAQ Getting Started Guide, which is accessible from Start»
Programs»National Instruments»NI-DAQ or at
offers NI-DAQmx users step-by-step instructions for installing software
and hardware, configuring channels and tasks, and getting started
developing an application.
If you are using other software, refer to the installation instructions that
accompany your software.
The NI-DAQmx CD contains example programs that you can use to
get started programming with the NI WLS/ENET-9000 Series device.
Refer to the NI-DAQmx for WLS/ENET Devices Getting Started Guide that
shipped with your device, and is also accessible from Start»Programs»
National Instruments»NI-DAQ, for more information.
You can use the NI WLS/ENET-9000 Series device on a desktop. Figure 3
shows the stacking grooves for NI ENET-9000 Series devices, and where
to apply the rubber standoffs for the NI WLS/ENET-9000 devices. For
secure desktop use, you can adhere the supplied rubber standoffs to the
underside of the device.
8
,
ni.com/manuals
ni.com