Multitech MultiModem II BA-Series User Manual page 144

MultiModemBA User Guide
S-REGISTER UNIT
S29 1
S30 min 0-255
S32 100mSec 0-255
S34 ASCII
S36 1 second 0-255
S37 1 second 0-255
* S48 N/A
* 2834 Series only
144
RANGE DEFAULT
1-255 20
0
20
0-60 10
0
5
33, 31, 0
28, 26, 24,
21, 19, 16,
14, 12, 96
and 48
DESCRIPTION
Specifies the amount of idle time can elapse
between AT commands after the SETUP
password has been entered
Inactivity timer used to disconnect modem.
Sets time that modem waits for a
<RETURN> to be entered during escape
sequence execution.
Buffer size for number of characters in AT
command string after on-line escape
sequence, before buffer is cleared and
escape sequence aborted.
S36 sets the time between DTR inactive and
the modem going off-hook (busy-out).
S37 sets the time allowed DTR active and
the modem responding on-hook (not busy).
S48 sets maximum speed modem connects
within scope of Enhanced V34
mode (e.g., S48 = 21 means
maximum connect speed is
‡
21.6K) . This register is useful when line
conditions will not support higher V34
speeds. The default value is 0, which
indicates a connection attempt of 28.8K.
‡
lower speeds are still enabled.