NewAir AC-14000E Owner's Manual page 9

K0080-1-2
Sleep Mode:
1. When in cooling mode, press the SLEEP button. The set temperature will increase 2
on the first hour, another 2
2. When in heating mode, press the SLEEP button. The set temperature will decrease 2
F on the 1st hour, another 2
3. In sleep mode, the fan will be automatically set to low. By pressing the SLEEP button
again, the set temperature and fan speed will revert back to previous settings.
4. The unit will shut down automatically after it has been in sleep mode for 12 hours.
5. Sleep mode will not work when the unit is in fan, dehumidification or auto mode. It will
only work in cooling or heating mode.
Swing Function
1. To activate the unit's swinging louvers, press the SWING button. The louvers will rise in
3 different angles: 45°, 60°, and 75°.
2. Once the air conditioner is turned on, the louvers will rise to a 75° first, and then
automatically return to 45°.
o
45
Dehumidification Function:
When the air conditioner is in dehumidification mode, the temperature cannot be adjusted,
and the fan speed will be automatically set to low.
Heating Mode:
When the air conditioner is in heating mode, ambient warm air is recycled and used to heat
your immediate area. The exhaust pipe will still need to be fitted onto the unit in order
for the cold air to be removed. When in heating mode, the machine can be set on HIGH
or LOW speed.
o
F on the second hour, and then maintain that temperature.
o
F on the second hour, and then maintain that temperature.
o o
60 75
FIG. 14
8
o
F
o