NetComm Liberty series User Manual page 16

3G Connection Status Page
APN (Access Point Name) for various providers
ISP
Telstra
Bigpond
Three (Post-paid)
Three (Pre-paid)
Vodafone (Post-paid)
Vodafone (Pre-paid)
Optus (Post-paid)
Optus (Pre-paid)
DODO
Virgin
Primus
Crazy John
Blink
Note: this table is up to date as of the printing of this manual
For non-3G Connections
Note: Before proceeding with this step, ensure that your WAN connection has been plugged into the WAN port of your 3G Router
To configure a non WAN connection (Static, DHCP, PPPoE, L2TP, PPTP), please follow these steps:
• Mouseover Internet Settings and click on WAN
• Select your WAN Connection type from the dropbox (Static, DHCP, PPPoE, L2TP, PPTP)
• enter the relevant information on this screen as supplied by your ISP
• Click Apply to save the settings
• If everything is configured properly, the Status page will show that your WAN service is online and the WAN IP address that has
been assigned.
Non-3G connection status page:
NetComm Liberty Series 3G Wireless N150 Wireless Router
16
APN Username / Password Required
Telstra.internet NO
Telstra.bigpond YES
3netaccess NO
3services NO
vfinternet.au NO
vfprepaymbb NO
Connect NO
preconnect NO
dodolns1 NO
WirelessBroadband NO
VirginBroadband NO
primuslns1 NO
purtona.net NO
splns888a1 NO
YmL1�WN YmL1�WN 1�WN
www.netcomm.com.au