Example - Netopia 2200 series Software User's Manual

CONFIG Commands
Operator Action
le Less than or equal to
eq Equal to
ge Greater than or equal to
gt Greater than
set security pkt-filter filterset filterset-name [ in | out ] index
src-port value
Specifies the source IP port to match packets (the port on the sending host that originated
the packet, if the underlying protocol is TCP or UDP).
set security pkt-filter filterset filterset-name [ in | out ] index
dst-port value
Specifies the destination IP port to match packets (the port on the receiving host that the
packet is destined for, if the underlying protocol is TCP or UDP).
set security pkt-filter interface
assigned-filterset filterset-name
Associates a filterset with a LAN or WAN interface.

Example:

set security pkt-filter ethernet A assigned-filterset set1
281