Netopia 2200 series Software User's Manual page 112

• Syslog: Enable syslog logging in the system.
• Syslog Host Name/IP Address: Enter the name or the IP Address of the host that
should receive syslog messages.
Facility: From the pull-down menu, select the Syslog facility to be used by the router
•
when generating syslog messages. Options are local0 through local7.
• Log Violations: If you check this checkbox, the Gateway will generate messages when-
ever a packet is discarded because it violates the router's security policy.
Log Access Attempts: If you check this checkbox, the Gateway will generate mes-
•
sages whenever a packet attempts to access the router or tries to pass through the
router. This option is disabled by default.
Log Accepted Packets: If you check this checkbox, the Gateway will generate mes-
•
sages whenever a packet accesses the router or passes through the router. This option
is disabled by default.
☛
112
NOTE:
Syslog needs to be enabled to comply with logging requirements mentioned
in The Modular Firewall Certification Criteria - Baseline Module - version 4.0
(specified by ICSA Labs).
See "Syslog Parameters" on page 111.
For more information, please go to the following URL:
http://www.icsalabs.com/html/communities/firewalls/certification/
criteria/Baseline.pdf