A typical SafeHarbour configuration is shown below:
Configuring a SafeHarbour VPN
Use the following procedure to configure your SafeHarbour tunnel.
Obtain your configuration information from your network administrator.
1.
The tables
may be required for your tunnel. Not all of them need to be changed from the defaults
for every VPN tunnel. Consult with your network administrator.
Complete the Parameter Setup worksheet
2.
ter Setup Worksheet" on page
The worksheet provides spaces for you to enter your own specific values. You can print
the page for easy reference. IPSec tunnel configuration requires precise parameter
setup between VPN devices. The Setup Worksheet
assures that the associated variables are identical.
132
"Parameter Descriptions" on page 136
describe the various parameters that
"IPSec Tunnel Details Parame-
133.
(page
133) facilitates setup and