Associating A Filter Set With An Interface - Netopia 2200 series Software User's Manual

Associating a Filter Set with an Interface

Associating a Filter Set with an Interface
Once you have created a filter set, you must associate it with an interface in order for it to
be effective. Depending on its application, you can associate it with either the WAN (usu-
ally the Internet) interface or the LAN.
To associate an filter set with the LAN, return to the Filter Sets page.
Ethernet 100BT
Click the
The Ethernet 100BT page appears.
link.
From the pull-down menu, select the filter set to associ-
ate with this interface.
Submit
Click the
the upper right corner of the page.
Click the Alert icon to go to the validation page, where
you can save your configuration.
button. The Alert icon will appear in
171