Shell Commands; Common Commands - Netopia 2200 series Software User's Manual

restart clear
The only commands you cannot truncate are and . To prevent accidental
restart clear
interruption of communications, you must enter the and commands in their
entirety.
You can use the Up and Down arrow keys to scroll backward and forward through recent
!!
commands you have entered. Alternatively, you can use the command to repeat the last
command you entered.

SHELL Commands

Common Commands

arp nnn.nnn.nnn.nnn
Sends an Address Resolution Protocol (ARP) request to match the nnn.nnn.nnn.nnn IP
address to an Ethernet hardware address.
clear [yes]
Clears the configuration settings in a Netopia Gateway. If you do not use the optional yes
qualifier, you are prompted to confirm the clear command.
clear_certificate
Removes an SSL certificate that has been installed.
clear_log
Erases the log information stored in flash if persistent logging is enabled.
configure
Puts the command line interface into Configure mode, which lets you configure your Neto-
pia Gateway with Config commands. Config commands are described starting on page
223.
226