SHELL Commands
• 1
low
or
– Low-level informational messages or greater; includes trivial status mes-
sages.
• 2
or
medium
– Medium-level informational messages or greater; includes status mes-
sages that can help monitor network traffic.
• 3
or
high
– High-level informational messages or greater; includes status messages
that may be significant but do not constitute errors.
• 4
or
warning
– Warnings or greater; includes recoverable error conditions and useful
operator information.
• 5
or
failure –
not be recoverable.
netstat -i
Displays the IP interfaces for your Netopia Gateway.
netstat -r
Displays the IP routes stored in your Netopia Gateway.
nslookup { hostname | ip_address }
Performs a domain name system lookup for a specified host.
•
The hostname argument is the name of the host for which you want DNS information;
nslookup klaatu
for example,
•
The ip_address argument is the IP address, in dotted decimal notation, of the device
for which you want DNS information.
ping [-s size ] [-c count ]{ hostname | ip_address }
Causes the Netopia Gateway to issue a series of ICMP Echo requests for the device with
the specified name or IP address.
•
The hostname argument is the name of the device you want to ping; for example,
ftp.netopia.com
•
The ip_address argument is the IP address, in dotted decimal notation, of the device
you want to locate. If a host using the specified name or IP address is active, it returns
one or more ICMP Echo replies, confirming that it is accessible from your network.
-s
•
The
size argument lets you specify the size of the ICMP packet.
Failures; includes messages describing error conditions that may
.
.
ping
229