Configure
For Netopia VGx technology models, separate Ethernet switch ports are displayed and
may be configured.
To enable any of them on this VLAN, select one, and click the
Typically you will choose a physical port, such as an Ethernet port (example: ethernet1)
or a wireless SSID (example: ssid1), and make the port routable by specifying lan-
uplink.
•
When you are finished, click the Alert icon in the upper right-hand corner of the screen,
and in the resulting screen, click the
•
If you want to create more VLANs, click the
VLAN
and then the
•
When you are finished, click the Alert icon in the upper right-hand corner of the screen,
and in the resulting screen, click the
☛
Note:
To make a set of VLANs non-routable, the lan-uplink port must be included in
at least one VLAN. It must then be excluded from any VLANs that are non-
routable.
Save
link in the resulting page, and repeat the process.
Save and Restart
Add
link.
Advanced
link (in the left-hand toolbar)
link.
button.
109