Netopia 2200 series Software User's Manual page 168

If you want the filter to forward packets that match its criteria to the desti-
2.
nation IP address, check the
If Forward is unchecked, packets matching the filter's criteria will be discarded.
Enter the
3.
You can enter a subnet or a host address.
Enter the
4.
This allows you to further modify the way the filter will match on the source address.
Enter 0.0.0.0 to force the filter to match on all source IP addresses, or enter
255.255.255.255 to match the source IP address exclusively.
Enter the
5.
You can enter a subnet or a host address.
Enter the
6.
This allows you to further modify the way the filter will match on the destination
address. Enter 0.0.0.0 to force the filter to match on all destination IP addresses.
If desired, you can enter a TOS and TOS Mask value.
7.
See "Policy-based Routing using Filtersets" on page 173
Select
8.
number of another IP transport protocol (see the table on
168
Source IP address this filter will match on.
Source Mask for the source IP address.
Destination IP
Address this filter will match on.
Destination Mask
Protocol
from the pull-down menu: ICMP, TCP, UDP, Any, or the
Forward
checkbox.
for the destination IP address.
for more information.
page 160).