Palm m100 Series Handbook page 83

If you are a System Administrator preparing several handhelds for a group of
users, you may want to create a user profile. See
Chapter 6 before performing the following steps.
You must perform your first HotSync operation with a local, direct
IMPORTANT
connection, or with infrared communication.
The following steps assume that you have already installed Palm Desktop
software. See "Palm Desktop software"
software.
To perform a local HotSync operation on a Mac computer:
Connect your handheld to the cradle/cable.
1.
Shown with a cradle.
Some models use a
cable in place of the
cradle.
Make sure HotSync Manager is enabled: Double-click the HotSync Manager
2.
icon in the Palm folder. Click the HotSync Controls tab and make sure the
Enabled option is selected.
Press the HotSync button
3.
The HotSync Progress dialog box appears followed by the Select User dialog
box.
"Creating a user profile"
in Chapter 1 if you have not installed this
on the cradle/cable.
HotSync
button
Common tasks
in
75