Palm m100 Series Handbook page 82

Chapter 5 Using Your Basic Applications
The HotSync Progress dialog box appears and synchronization begins.
Wait for a message on your handheld indicating that the process is complete.
4.
After the HotSync process is complete, you can remove your handheld from the
cradle/cable.
TIP
Performing a HotSync operation for the first time:
Mac computer
When you installed Palm Desktop software, you entered a user name. This user
name is the connection between your handheld and your computer.
The first time you perform a HotSync operation the Palm Desktop software:
Adds a user name to your handheld.
Creates a folder for the user name in the Users folder inside the Palm folder. For
example, if you entered Jane Garcia as your user name, a folder called Jane
Garcia is created in the Users folder.
Creates a file named User Data in your user name folder.
NOTE
change users by selecting a new name in the pop-up menu.
Each subsequent time you perform a HotSync operation, HotSync Manager reads
the user name from your handheld and synchronizes the data in the folder of the
same name.
NOTE
entering data on Palm Desktop or performing a HotSync operation.
74
Gently rock your handheld forward in the cradle and then lift it to remove.
User names appear in the User pop-up on the right side of the toolbar. You can
Be sure you select the correct user name from the User pop-up before