Palm m100 Series Handbook page 14

Chapter 1 Introduction to Your Handheld
Scroll buttons/
Clock control
Changeable face
plate
Using the backlight
When your handheld is on, a backlight illuminates your screen and enables you to
see the information, even under difficult lighting conditions. The backlight
brightness is initially set to high, but you can set the brightness to low to save
power. When you set the brightness, your handheld remembers your preference
until you change the brightness.
To set the backlight:
Press the power button and hold it down for about two seconds. Release the
button when the backlight brightness is set to your preference.
In addition, you can assign the full-screen pen stroke to set the backlight. See
TIP
"Pen preferences"
Locating back panel components
Stylus
Reset button
Universal
connector
6
Displays text and other information that extends beyond the
handheld screen area.
When your handheld is on, pressing the lower button scrolls down
to view information below the viewing area, and pressing the
upper button scrolls up to view information above the viewing
area.
When your handheld is off, pressing the top button displays the
time.
Protects your handheld and enables you to personalize your
handheld's appearance.
in Chapter 7 for details.
Face plate tab
IR port
Expansion
card slot