Upgrading From Another Palm Os Handheld - Palm m100 Series Handbook

Stylus
Face plate tab
IR port
Expansion card
slot
Reset button
Universal
connector

Upgrading from another Palm OS handheld

If you already own a Palm OS handheld, you must install the version of Palm
Desktop software that comes with your new handheld. To upgrade quickly and
easily, perform the tasks described in the following sections. Some tasks are
specifically for upgrading.
Serves as a pointing and writing device for navigating through
applications and entering data on your handheld. To use the
stylus, slide it out of the storage slot and hold it as you would a pen
or pencil.
Releases the face plate so you can personalize the appearance of
your handheld with another face plate (sold separately).
Uses infrared technology to transmit data to and receive data from
other Palm OS handhelds, and to perform HotSync operations.
See "Common tasks"
Chapter 7 for more information.
Accepts Secure Digital (SD) or MultiMediaCard content and SDIO
cards, enabling you to add more memory, applications, or
functionality. You can also back up data to an expansion card.
Under normal use, you should not have to use the reset button.
See Appendix A for information about when and how to use the
reset button.
Connects your handheld to the cradle/cable, which in turn
connects to the back of your computer and power. This allows you
to update the information between your handheld and computer
using HotSync technology and recharge the battery.
The universal connector also connects peripheral hardware
devices, such as a modem, to your handheld.
Upgrading from another Palm OS handheld
in Chapter 5 and "IR HotSync operations" in
7