Palm m100 Series Handbook page 165

To select a connection type:
Tap the service field.
1.
Tap Details.
2.
Tap the Connection type pick list and select one of the following connection
3.
types:
Point-to-Point protocol
PPP
Serial Line Internet Protocol
SLIP
Compressed Serial Line Internet
CSLIP
Protocol
If you are not sure, try PPP; if that doesn't work, ask your Internet
NOTE
Service Provider or your System Administrator for the correct connection type.
Idle timeout
The Idle timeout setting defines how long your handheld waits before dropping
the connection with your ISP or dial-in server when you switch out of a TCP/IP
application.
To set the Idle timeout:
Tap the Idle timeout pick list and select one of the following options:
1.
Waits one minute for you to open another application before it
1 minute
drops the connection.
Waits two minutes.
2 minutes
Waits three minutes.
3 minutes
Keeps your PPP or SLIP connection until you turn off your
Never
handheld (or until it times out). This option works best with the
PalmModem accessory.
Tap OK.
2.
Network preferences and TCP/IP software
Select connection type
157