Olivetti Fax_Lab 146D Instructions Manual page 58

T
O HEAR THE LINE SIGNALS
The fax machine is set up so that you can hear the
dialling tones during the dialling phases as well as
the connection signals exchanged between your fax
machine and your correspondent's fax machine. If you
cannot hear them, program the function as follows:
1. Press the key:
The display shows:
2. Press the keys
until the display shows:
3. Press the key:
The display shows:
4. Press the keys
until the display shows:
5. Press the key:
The display shows:
6. Press the keys
until the display shows:
7. Press the key:
The display shows:
8. To view the other available option, "LINE MONITOR -
YES", press the keys:
9. To confirm the setting, press the key:
10. To return the fax machine to its initial stand-by mode,
press the key:
11. If you want to move back one function, press the key:
5 6
T
O REGULATE THE SPEAKER VOLUME
If the volume of the dialling tones and connection sig-
nals is too low or too high, regulate it using the
key.
1. Press the key:
The display shows:
2. To raise or lower the volume of the speaker, press the
key:
The display shows the volume level set on the top line.
3. To return the fax machine to its initial stand-by mode,
press the key:
T
O REGULATE THE BUZZER VOLUME
The buzzer indicates particular operating conditions and
faults or errors.
The buzzer volume may be set to four levels, or
even turned off altogether.
1. Press the key:
The display shows:
2. Press the keys
until the display shows:
3. Press the key:
The display shows:
4. Press the keys:
The display shows:
5. Press the key:
The display shows:
6. Press the keys
until the display shows: