Olivetti Fax_Lab 146D Instructions Manual page 29

T
O SEND A DOCUMENT
W
HAT DOCUMENTS MAY BE USED
Dimensions
• Width min. 148 mm - max. 210 mm
• Length min. 105 mm - max. 600 mm
• Unit weight 70 - 90 gr/m
For documents of different sizes from those specified above,
photocopy the original onto A4 sheets or another supported
format and send the copy.
N
EVER USE
• curled paper
• excessively thin paper
• torn paper
• damp or set paper
• excessively small paper
• crumpled paper
• carbon paper
In addition, in order to avoid damaging your fax machine and
invalidating your guarantee, make sure that the documents
you are to use do not contain:
• staples
• paper clips
• adhesive tape
• correcting liquid or glue that has not yet dried.
In all these cases, photocopy the document and send the
copy.
T
O PLACE THE DOCUMENT IN THE ADF
1
2
(max. 5 sheets)
1. Push the paper support exten-
sion in the slot until it clicks into
position.
T
RANSMISSION AND RECEPTION OPERATIONS
2
3. Once the document has been inserted in the automatic docu-
ment feeder (ADF), the display shows on the top line:
and on the bottom line, the default contrast value: "NORMAL".
If you do not perform any operation within about two minutes
of inserting the document in the automatic document feeder
(ADF), the fax machine will automatically unload the docu-
ment from the feeder.
T
O ADJUST THE CONTRAST AND RESOLUTION
Before sending a document you can make some ad-
justments on the fax machine so as to optimize the
printing quality.
T
O ADJUST THE CONTRAST
1. Press the key:
The display shows:
2. Press the keys
until the display shows:
3. Press the key:
The display shows:
4. Press the keys
until the display shows:
5. Press the key:
The display shows:
2. Place the document in the auto-
matic document feeder (ADF)
with the side to be sent face down
(A).
Place the document against the
right-hand side of the feeder (B):
see the mark printed on the fax
machine's casing.
2 7