Table of Contents
Advertisement
FS-2/2E FUNCTIONS
0001
0002
0003
0004
S
2:
Scroll to the desired clip, then select
TEP
NEXT.
The
displayed.
HDD:
CLIP
00:00:01:23
00:00:02:00
EXIT
Delete List
The DELETE LIST option allows you to delete an
entire playlist.
S
1:
Select
DELETE
TEP
PLAYLIST menu. All the playlists on
disk are displayed.
03-20-20
06-20-20
03-25-20
03-30-20
EXIT
S
2:
Select the playlist you wish to delete
TEP
and press SEL. You are asked to
confirm
the
PLAYLIST XX-XX-XX? "
S
3:
Press YES to complete the deletion.
TEP
2 - 18
1-001
1-004
1-001
1-003
NEXT
clip
information
CLIP INFO
01
0001
BACK
LIST
from
the
SEL
request:
"DELETE
FS-2 and FS-2E Studio DTE Disk Recorders User Guide
Part Number: MANL-0927-03
HDD Bypass
HDD Bypass mode allows the connected FireWire
hard drives to be mounted or dismounted to a
computer without removing them.
In this mode, the computer connects to the "HDD
I/O" port on the FS-2/2E Rear Connector Panel.
When you select HDD Bypass, the following
displays on the FS-2/2E LCD:
is
GO TO HDD
BYPASS?
EXIT
To Exit this mode, press the EXIT key.
Be sure to properly dismount the
FireWire drive from the computer
system before exiting HDD Bypass
mode on the FS-2/2E.
Internal HDD
The internal HDD function allows you to remove the
front mounted IDE drive from FS-2/2E without first
having to power the unit down.
Select INTERNAL HDD by pressing
the SEL button.
Answer YES to "Remove Internal
HDD?" (Select EXIT to abort.)
Remove the disk drive from the
FS-2/2E when prompted. To remove
the hard drive, push the latch on the
front right of the drive to the right. The
drive handle pops out from the face of
the drive. Then carefully pull the drive
out from the drive bay. Press EXIT to
complete the process.
To reinsert the drive, slide it back into
the drive bay and press the handle
back into place until you hear a click.
The drive will be recognized by the FS-
2/2E after about a minute.
YES
NO
Advertisement
Table of Contents
