Gpi Port; Backlight; Stop Output - Focus FS-2/2E STUDIO DTE User Manual

FS-2/2E FUNCTIONS
ENABLE
DISABLE
EXIT

GPI Port

This menu allows you to change the setting of the
GPI port.
The highlighted function is the current
setting after exit.
Press EXIT to return to the menu
screen.
DISABLE
PAUSE/UNPAUSE
INDEX (NEW FILE)
REC SNAPSHOT
EXIT
DISABLE - This selection allows you
to connect a 3.5mm to DB9 cable to
the GPI port and control the FS-2/2E
using RS232C
device. You can also use the FS-2/2E
with the optional wired remote control
unit (ACSS-0019-01). Purchase this
item at the Focus Enhancements
online
www.focusinfo.com/sales/store/.
The remaining three selections allow functions to
occur from a simple contact closure as follows:.
PAUSE/UNPAUSE
allows control of pause and unpause
during a record or playback session.
INDEX (NEW FILE) - This setting
creates a new file during a record
session without losing any frames.
REC SNAPSHOT
records a single frame of video to a
FS-2 and FS-2E Studio DTE Disk Recorders User Guide
from an external
store: https://
-This selection
- This setting
Part Number: MANL-0927-03
file. Each sequential use of this
function captures another frame to the
same file until stopped.

Backlight

This selection enables or disables the FS-2/2E LCD
backlight.
BACKLIGHT
ON
OFF
AUTO OFF
EXIT
The highlighted state is saved after
exit.
Press EXIT to return to the menu
screen.
The ON setting leaves the LCD backlight on
continuously. The OFF setting turns it off.
AUTO OFF turns off the backlight after one minute.
Press any keypad button on the FS-2/2E to turn the
LCD backlight back.

Stop Output

Use this option to select the video displayed while
the FS-2/2E is in STOP mode. The selected mode
is the current state after exit.
NOTE: This setting does not effect E-E mode.
GRAY
NO OUTPUT
CLIP PREVIEW
CUSTOM
EXIT
When you select GRAY, a black screen appears.
If you select NO OUTPUT, a blank screen appears.
If you select CLIP PREVIEW. The first frame of
each clip is generated and shows on all outputs
after 1 second if you pause on that clip.
2 - 25